Differences

This shows you the differences between two versions of the page.

--- sysadmin:services:proxmox [2024/05/08 14:29] – kjohns23
+++ sysadmin:services:proxmox [2024/05/08 14:56] (current) – kjohns23
@@ Line 18: / Line 18: @@
 ==== Graphic Interface ====
-The graphic interface can be reached at any of the above servers, by specifying https and :8006 as the port number. These are only accessible from the Reynolds server room network (131.104.48.0/23) or SoCS IT admin IP addresses that have been added to the firewall rules.
+The graphic interface can be reached at any of the above servers, by specifying https and :8006 as the port number. These are only accessible from the SoCS server room network (131.104.48.0/23) or SoCS IT admin IP addresses that have been added to the firewall rules.
+Graphic access is via personal user accounts. These need to be explicitly added to the Proxomox Users section and admin privileges granted if required.
+==== Shell Access ====
+The nodes are also accessible via ssh at the above hostnames, again from the SoCS server room network.
+==== VM Storage ====
+VM disks should be stored on the node zfs pools to allow all zfs features (snapshotting/send-receive/etc). Gringotts is also mounted to allow backups.
+==== Backups ====
+VMs are backed up to Gringotts on a weekly schedule, occurring at 2am on Sunday mornings.
+==== Snapshots ====
+Sanoid is installed and configured to snapshot the VMs on an hourly/daily/monthly cycle. The configuration is in /etc/sanoid/sanoid.conf. Exceptions are added to disable snapshots for the Kuberenetes nodes as well as the Windows servers as they consume too much disk space.