School of Computer Science Wiki

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

==== Toshiba eStudio 4505ac Setup ====

These instructions apply to the two large Toshiba printers located in J. D. Maclachlan and Mackinnon.

== All Platforms ==
  - Browse to [[http://business.toshiba.com/usa/support/index.jsp#msds]], search for "4505ac"
  - Under "e-Bridge Current Drivers" download the driver driver for your OS, if you want to print double sided, choose the duplex driver.
    - Choose Mac OSX 10.6 and later, Single Sided, Color for OSX
    - Choose Windows e-Bridge Universal 2 PCL/PS 32/64 Bit Driver for Windows
  - Install the driver

== OSX ==
  - Open the add new printer interface and choose add a new printer by IP
  - Enter "photocopier.socs.uoguelph.ca" or "staffcopier.socs.uoguelph.ca"
  - Choose the HP Jetdirect - Socket protocol
  - The driver you installed above should be listed in the "Use" section. Then click "Add"
  - Choose the settings shown in the attached screen shot

{{:techsupport:guides:screen_shot_2017-04-17_at_11.52.36_am.png?200|}}

== Windows 10 ==
  - Select Start and type "Advanced Print" in the search box, choose "Advanced Printer Setup"
  - Select "The printer I want wasn't listed"
  - Select “Add a printer using a TCP/IP address or hostname” , then select “Next“
  - Select “TCP/IP Device” in the “Device type” list
  - Type "photocopier.socs.uoguelph.ca" or "staffcopier.socs.uoguelph.ca" as the hostname and hit next
  - If you installed the drivers found above, Windows should automatically choose the correct drivers.
  - After installation check the photocopier's printer options in Control Panel after the printer is added, as Windows 10 seems to default to the bypass tray instead of tray 1

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International