sysadmin:procedures:neworacle
This is an old revision of the document!
iLOM CLI
To control the server from a terminal session:
$ ssh root@cp-gringotts.mgmt.socs.uoguelph.ca
- From the CLI, enter one of the following commands:
- reset /SYSTEM
- stop /SYSTEM
- stop -f /SYSTEM
- start /SYSTEM
For more information, refer to Controlling Host Power, in the Oracle ILOM Administrator's Guide for Configuration and Maintenance Firmware Release 4.0.x at http://www.oracle. com/goto/ilom/docs.
this should go in a hardware section somewhere
sysadmin/procedures/neworacle.1711552345.txt.gz ยท Last modified: 2024/03/27 15:12 by kjohns23